This CAS 3 Interface Plus, combines all the superb features of the CAS 2 Interface, its Add-On Board plus many additional options.
This new release offers very advanced technical features. Unlike the CAS 2 Interface, the CAS 3 Interface Plus can fully manage PCMCIA connectors and easily connect external additional modules.

This can also be used as a common interface slot for your cam as if it was inserted into the receiver.

CAS 3 Interface Plus can also be used by professionals to test a CAM (Conditional Access Module) without inserting it in a receiver.
CAS 3 Interface Plus also enables users to manage and program several types of SmartCard, which includes both current ones and those yet to be developed.
Therefore the CAS Interface 3 Plus can be regarded as a multifunction programmer suitable for the management of J-Tag, ISP, I2C, etc., through a USB port.

Features:

• USB Full Speed connection at 12 Mbit (no need for external power supply)
• RS-232 Serial Connection
• Multifunctional output
• Full PCMCIA connector support
• Common Interface emulation
• 20 Pin External Connector
• J-Tag via USB function
• Wireless connection to other Duolabs products
• Compatible with all Windows operating systems
• High Performance Win-Drivers for USB
• Upgradeable Firmware
• User-friendly GUI
• Updates or repairs the Dreambox plus various multi-CAMs, including: Magic, Matrix, Global, Universal AXAS, Joker, Skycrypt, ICE and FreeXTV
• Dragon CAM updates via Dummy Card

Additional Features:

Common Access Modules (CAM):

• Diablo CAM. Cas Interface 3 together with Cas Interface 2 are the only programmers which are supporting the Diablo CAM Light, Diablo CAM Wireless and Diablo CAM WiFi programming. The programming for this device is very quick and reliable. Simply insert the CAM in the Cas Interface and choose the file you want to load in.
• Magic Cam, Matrix Cam, Matrix Revolution, Matrix Reloaded, Matrix Reborn, and all CAMs based on SIDSA chipsets, which can be managed directly by means of a PCMCIA connector.
• Joker Cam, Zeta Cam and substantially all CAM modules based on NEOTION chipsets. These modules can be programmed and repaired using a J-Card.
• Dragon Cam. It is possible to program any version by inserting the Dragon Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the Dragon Cam into a receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty Dragon Cams if they fail to initialize due to a faulty Flash Memory. To do so, it is sufficient to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
• X-Cam, with ANGEL and ORION chipsets, standard and premium version. It is possible to program any version by inserting the X-Cam into Cas Interface 3 and using a Dummy Card. This mode eliminates the need of inserting the X-Cam into the receiver, which can sometimes damage the CAMs besides being unpractical. It is also possible to repair faulty X-Cams if they fail to initialize due to a faulty Flash Memory. In this case it is necessary to open the module and connect a few wires, following a procedure that can be easily implemented even by less expert users.
• GigaCAM with Smit chipsets. This is one of the most recent adds to the CAM programming.

Smartcard support

• Smartcard programming: This feature is very important for all those who wants to program a Smartcard based on PIC microcontroller or Atmel microcontroller.
• RS-232 Phoenix Smartmouse emulation: This emulation can be done through the RS-232 serial port. No matter what's the clock speed for the Smartcard. You can either choose 3,58/3,68/4,00/6,00 Mhz. This great feature is given by the total flexibility of the internal programmable clock generator.
• DreamBox 56xx and 7000 series boot repairing function: If your DreamBox wil not reboot due to a faulty flash the CAS Interface 3 will solve your problem without the need for any special cables or hard soldering.
• Sidsa embedded chip Set-Top-Boxes programming: Program the Sidsa CA embedded module. This most works like Cam programming feature. No need for special cables or special connectors. Support receivers are Xtreme, Manhattan, Nextwave 2500.
• Cam Explorer: This is a real cool feature which allows the user to insert any Cam in the PCMCIA connector and browse the content of you Cam. This acts like a real Common Interface Set Top Box. It gives you the possibility to get into the menus and at the same time use all the remote controller features.
• Various Utilities: Various PC utilities are included in Cas Studio. All those tools are free of charge and can be freely used. Duolabs made them to give the user the possibility to enjoy other
  • Sim Editor. This software allows you to edit your GSM smartcard. Save/edit phonebook, SMS and Smartcard files.
  • Wincrypt. This software allows you to encrypt and decrypt your files and folders using as 3DES key your GSM Smartcard. This software works pretty much as Winzip but the encryption is secured by a secret key in your GSM Smartcard.

Package Includes

• 1 CAS Interface 3 Plus device
• 1 J-Card
• 1 Dummy Card

Diablo CAM Lite Version 2.3

Specification

Hardware:

• ARM7TDMI @ 50Mhz.
• FPGA @ 100Mhz processing speed.
• RAM: Internal 16KB and External 512KB.
• ROM: 256KB Internal Flash and 2MB Dataflash.
• J-tag connection.2 Smartcard Readers ISO and Plug-In.
• 2 Unique serial Numbers internally lasered inside.

Software:

• PICO-OS Operating System.
• Dataflash internal Filesystem FAT 12.
• Fully programmable by PCMCIA secure protocol.