This Moteck VBoxII is used to position your C band dish. It takes DiSEqC 1.2 commands from your MPEG2 DVB satellite receiver and converts it into 36V pulse and sensor to store positions - can store 99 Positions. It can work as a stand alone positioner or it can accept DiSEqC 1.2 commands from a satellite receiver. Motor. Controls and displays position. Remote control Included.

Feature:

• Compatible with DiSEqC 1.0 /1.2 Receivers or Any Receiver
• Compatible with any Reed Switch Actuator or H-H Mount
• 5V DC Output for Optical Sensor Actuator
• 3 Digit LED Display
• Drive Dish up to 3M
• 99 Satellite Positions
• Fine-tune EAST / WEST Buttons
• Optional Remote Control Available
• Overload Protection (Auto-recovery)
• Anti-Noise Design
• Remote Control Included

Specification:

• Model: V-BOX II
• Input: 110 VAC / 60Hz
• Output: 36 VDC
• Max. Dish Diameter: 3M
• Max. Output Current: 3.5A
• Max. Power Consumption: 80W
• Protocol: DiSEqC 1.0 / 1.2
• Positions Memories: 99
• Controlled by: DiSEqC 1.2 Receiver or Included Remote Control
• Display: 3 Digit LED
• Resynchronize Function: YES
• Manual Buttons Power ON / OFF, EAST / WEST
• Protection
  • Software Limit Protection
  • Electric Overload Protection